How to Test an Electric Skateboard

Using a newly purchased electric skateboard or even a simple DIY unit for the first time can be very exciting. However, it can also be a serious process, especially if the new users are curious about whether the best electric skates meet expectations or not. To make it a more systematic experience, here are the three phases every e-skater should follow:

Three Tests for Electric Skateboards

Phase 1: Remote Control Test

  1. Check the power switch by turning the remote control on and off while observing any light or sound signal from the wireless device and electric skateboard (make sure the batteries are installed correctly).
  2. Flip the electric skateboard upside down on a flat surface.
  3. Increase the speed of the electric skateboard via the remote control and then check whether the wheels are moving faster or not.
  4. Decrease the speed of the electric skateboard via the remote control and then check whether the wheels are moving slower or not.
  5. Reverse the electric skateboard via the remote control and then check whether the wheels are moving backward or not.
  6. Activate the brakes via the remote control and then check whether the wheels stop moving or not.

Phase 2: Feel Test

  1. Look for a flat area to finally test the acceleration, brakes, and overall feel of the electric skateboard.
  2. Accelerate the electric skateboard at low speed for a few meters to ensure safety.
  3. Activate the brakes and pay attention to their responsiveness or efficiency.
  4. Look for an area with a very subtle slope to slightly test the power and speed of the electric skateboard uphill.
  5. Go downhill on a slight slope to test the brakes without causing a serious accident.
  6. If the electric skateboard performs well uphill and downhill on a slight incline, look for a small hill to ensure whether it’s generally good for slopes or not.
  7. If the electric skateboard performs well on a small hill and you’re ready to challenge its system, look for a steeper slope and observe the e-skate’s performance.

Phase 3: Motor and Battery Test

  1. Use a wide flat area to test the electric skateboard’s top speed with the remote control (if it includes a data screen), an app (especially the one liked directly into the e-skate’s system), or a phone/stopwatch that can monitor both distance and time (calculate speed by dividing distance by time).
  2. Ride with the highest speed setting to your target distance.
  3. Compare the results to the product description.
  4. Fully charge the battery.
  5. Prepare a device that can measure distance.
  6. Use the same flat area (ride the e-skate in huge loops) or travel to familiar destinations within your town or city (make sure it’s legal there) to test the electric skateboard’s battery life (preferably during cold weather to push the battery’s limitations).
  7. Ride until the battery dies.
  8. Check the results and compare them to the product description.

What to Do After a Poor Performance

If the electric skateboard is cheap and from a suspicious Chinese e-skate manufacturer[Are Chinese Electric Skateboard Manufacturers Trustworthy], it wouldn’t be so surprising if it reveals fake product claims. Most users tend to accept the reality and just casually ride the e-skate.

However, if you’re fortunate to buy a cheap product with a warranty and an active customer support system, don’t hesitate to inquire just in case there are existing factory defects.

Meanwhile, with an expensive high-performance electric skateboard[How Much do Electric Skateboards Cost] from a popular company, do everything you can to raise the problems you’ve noticed during the entire testing process. Don’t settle for a subpar unit if you’re paying too much money for it.