Planning to cruise the streets like a boss? What about taking a road trip without driving anything? All you need is a fantastic longboard that can take you anywhere you want.
Longboarding, however, can take hours. People who buy longboards generally want to experience travelling, cruising, and even downhill racing in a wider range and longer duration. That’s why a standard longboard uses a different set of wheels than the ones used by skateboards.
Since quality is crucial for longer cruising, you should consider buying some of the best longboard wheels brands have in store. Luckily for you, we’re going to share a list of premium options plus helpful buyer tips later to save you the trouble of tedious research.
Table of Contents
- 1 16 Best Longboard Wheels Review
- 1.1 Shark Wheel Sidewinder 70mm 78a Longboard Wheels
- 1.2 Orangatang Caguama 85 mm
- 1.3 Seismic Speed Vent
- 1.4 Orangatang Kegel 80 mm Downhill
- 1.5 Orangatang in Heat 75 mm Downhill
- 1.6 Fireball Beast 76mm Longboard Skateboard Wheels with Bearings
- 1.7 Orangatang Stimulus 70 mm Freeride
- 1.8 Orangatang 4 President 70 mm Cruising
- 1.9 FREEDARE 70mm Longboard Wheels with ABEC-7 Bearings and Spacers
- 1.10 70mm Longboard Skateboard Wheels + ABEC 7 Bearings Spacers
- 1.11 Bigfoot Longboard Wheels 76mm 80A SHR Mountain Cruisers
- 1.12 Sector 9 Slide Butterballs Skate Wheels
- 1.13 Sector 9 Skiddles 70mm 78A
- 1.14 ABEC 11 SuperFly
- 1.15 Orangatang Kilmer 69 mm Freeride
- 1.16 Powell Peralta Rat Bones
- 2 How to Choose Good Longboard Wheels
16 Best Longboard Wheels Review
Feel free to pick a set or two from these products:
Shark Wheel Sidewinder 70mm 78a Longboard Wheels
Compared to regular wheels, Shark Wheel Sidewinder 70mm 78a Longboard Wheels give better control and grip. They are carefully designed for longboards to prevent loose attachment, a common cause of longboarding accidents. They are also ideal not just for cruising but for carving as well.
More about the grip, each wheel has a sine wave form. To be more specific, it has three “lips” providing unbelievable lateral grip. When all four wheels work together, you can retain balance even when you’re sliding because of the smooth breakaway and recovery.
Thanks to its Sidewinder technology, this product gives a higher level of traction. Not only that, traction is maintained no matter where you go. It can handle different types of surfaces — even the ones with sand, water, and rocks.
Despite the excellent grip of these longboard wheels, they can reduce the level of friction produced when they’re in direct contact with the ground. That’s mainly because of their wider structure yet wavy pattern for a thinner contact area. The result is a faster, more exciting ride.
If you’re particular about style, this option offers multiple color choices. You will have a blast expressing your personality.
The features of the Sidewinder are so unique, innovative, and effective that the product was ultimately featured on the Discovery Channel and the popular show “Shark Tank”.
- Wide sine wave wheels for a stronger grip without too much friction
- Sidewinder technology for traction on any terrain
- Fun color selections
- Inconsistent molding of the design
- Easily split after a few miles or months
- Not smooth enough for rough surfaces
- Peeling paint
Orangatang Caguama 85 mm
Known for its big size and smoothness, Orangatang Caguama 85 mm isn’t just about speed and comfort. It will also improve your momentum when you commute, carve, push, pump, or cruise nonstop with an electric longboard. It comes with Loaded Jehu V2 bearings, speed rings, and spacers so expect only the best.
With the 85-millimeter diameter and the delicately rounded edges of each wheel, your longboard will maintain speed even when there are sticks and cracks on the ground. The grip will also remain foolproof because of the 56-millimeter contact area.
Going hand in hand with the large wheels is the big, stiff core. The 46-millimeter supportive core is completely exposed. Its purpose is to minimize weight and, at the same time, ensure easier acceleration without falling short on momentum.
When it comes to the material used, these longboard wheels use the Happy Thane formula. They are made of urethane, making them swift and smooth with a steady grip. As a plus, urethane is resistant to high heat, a useful feature when you’re cruising the hot streets on a sunny day.
Don’t worry about the hardness of these wheels. You may choose from the three durometers provided by the manufacturer. The blue one is 77a, orange for 80a, and purple for 83a. You have the freedom to opt for the softer or harder type.
- 85mm size for consistent speed regardless of the surface type
- 56mm contact area for a reliable grip
- 46mm core to keep the wheel lightweight and ready for momentum
- Heat-resistant urethane
- Available in different durometers
- Chipped edges in just a few months or miles
Seismic Speed Vent
If simple cruising isn’t your thing, you’re probably into something more exhilarating like downhill racing. What you need is a faster longboard. And, that’s possible with Seismic Speed Vent.
This product is considered to be the fastest option in the category of big longboard wheels. It is perfect for cutting long-distance rides short if you’re in a hurry.
During your first attempts with these wheels, they’re going to have a really strong grip. However, once they have enough experience on the ground, it will be easier for you to slide longer and drift in a precise manner.
More about gripping, sliding, and drifting, this option comes in three formulas for different preferences. The BlackOps is extremely high-speed with a powerful grip. However, its slides aren’t smooth enough.
Meanwhile, DefCon has a mind-blowing speed you will surely enjoy when you slide and drift. You can control its grip, resulting in smoother motions. And, the best part? It can last for a very long time.
Lastly, Clear has more rebound. It rolls in the fastest way possible.
Because of the variety of choices, there are more durometers to consider for a more satisfying purchase. BlackOps has 76a, 78a, and 79a. Next, DefCon includes 77a, 78.5a, and 80a. For Clear, we have 75a, 77a, and 79a.
- BlackOps, DefCon, and Clear formulas for different kinds of riders
- Lots of durometer choices
- One of the most expensive longboard wheels
- Too heavy for other riders
- Requires spaces on the board clearance or cutouts
- Premature chipping
- Slower performance if softer
Orangatang Kegel 80 mm Downhill
For riders who prefer downhill longboard wheels, Orangatang Kegel 80 mm Downhill is a great pick. It is designed for ultimate grip and acceleration. It can amp up your weekly workout so you can achieve your fitness goals in a snap.
This product includes eight pieces of Loaded Jehu V2 bearings. It uses the same set of bearings as the previous Orangatang wheels we discussed earlier, but there’s a slight difference. It has enlarged inner raceways, making separate speed rings and spacers unnecessary.
When it comes to the material, though, both Orangatang products use Happy Thane formula. As expected, they contain urethane for added grip and smoothness. They even have the same 46-millimeter core.
Meanwhile, unlike the wavy pattern of Shark Wheel Sidewinder, this one has distinct square lips to enhance grip while maintaining smooth slides. In addition, its outer lip sticks out despite the straight profile. It aims to prevent a significant decrease in quality even as the wheel starts to wear.
On the other hand, the inner lip is shorter and has a soft inward bevel for traction during downhill racing. It will also help you control drifts.
- No need for spacers and speed rings
- Smooth urethane wheels with square lips for impressive grip
- Protruding outer lip and straight profile to slow down the consequences of wear
- Short inner lip with a slight inward bevel to make sure there’s traction when going downhill
- 46mm core to ensure lightness and momentum
- Falls apart after a few months
- Edges prone to cracks
Orangatang in Heat 75 mm Downhill
If versatility is the most important factor for you, Orangatang in Heat 75 mm Downhill is highly recommended. Whether you’re pushing, pumping, carving, or downhill racing, you won’t have a hard time with these wheels. That’s the advantage of a balanced 75-millimeter type.
Just like Orangatang Kegel, this one has square lips. Its goals are better traction, grip, and slides. For a more advanced rebound, a rippled pattern composed of urethane is included.
Instead of just three durometers, these longboard wheels have four options. The blue, orange, purple, and yellow choices are 77a, 80a, 83a, and 86a respectively.
Blue 77a is added to have another option that’s much smoother and fluffier than the older selections. It guarantees more strength to ensure grip in both urban and remote areas. It is specifically ideal for concrete roads and mountain trails.
- 75mm wheels for effortless balancing
- Amazing rebound thanks to the rippled design
- Additional durometer type to provide riders with the softest option
- Fragile edges
- Easily gets deep gashes
Fireball Beast 76mm Longboard Skateboard Wheels with Bearings
Urethane is a pretty common material for longboard wheels, but Fireball Beast 76mm Longboard Skateboard Wheels have a special version. Called Beast Urethane, the unique material is designed for the best grip and slide you can achieve.
Speaking of the best slide, this product uses a technology referred to as the SlidePrepped. Exclusive to Fireball wheels, SlidePrepped represents the process of removing the contact patch’s topmost layer through sand stone grinding.
That’s why you can immediately use the wheels for sliding as soon as you attach the brand-new set to your longboard.
Additionally, the sharp bevels contribute to smoother slides. They are part of the reason why these wheels can handle cracks and other obstacles. As an extra advantage, they’re attractive as well to keep the design cool and trendy.
As for the durometers, these longboard wheels have three. The white one is the softest with its 81a rating, red for the medium 84a type, and black for the hardest variation which is 87a.
When it comes to the size, each wheel stands 76 millimeters. It can roll extremely fast without too much resistance.
- SlidePrepped technology for smooth slides during your initial use
- Stylish functional bevels
- 76mm wheels with less rolling resistance
- 76mm size not ideal for some longboards and activities
Orangatang Stimulus 70 mm Freeride
Another versatile choice, Orangatang Stimulus 70 mm Freeride is an effective medium-sized wheel for freeriding and doing tricks with your longboard. As expected from an Orangatang product, it has Loaded Jehu V2 bearings. It is one of the brand’s models with integrated speed rings and spacers.
The advantage of 70-millimeter wheels is their lightweight structure. That makes them sensational for tricks.
Since light wheels can be flimsy, the 70mm diameter aims to support acceleration and minimize vibration when rolling over gravel and other debris.
Performing like a true race wheel with the perfect drifts of a freeride wheel, this product is a combination of innovative features. Its offset bearing seat is combined with a big contact patch. For better performance, the rounded lips are stiff.
- Remains lightweight for tricks
- 70mm wheels for a steadier ride despite the lightness
- Needs constant pushing
- Inconsistent slides
- Uneven wear
- Makes noises
Orangatang 4 President 70 mm Cruising
If you’re looking for longboard wheels designed for racing or carving, Orangatang 4 President 70 mm Cruising is an appropriate choice. It is also versatile because of its traction. It is highly effective for commuting, cruising, and pumping.
This product is undoubtedly an Orangatang model, judging by the bearings it uses. It has Loaded Jehu V2 bearings plus speed rings and spacers.
We have mentioned earlier that the 70-millimeter size is known for its lightness. However, this particular Orangatang variation is more than just its weight. It promotes constant acceleration even when you carve.
Why are these longboard wheels superior in some aspects, anyway? They have angled edges that can help you do hard carves and downhill rides safely.
Their lip profile also deserves some praise. It is thick and sturdy for hassle-free drifting especially when kicked sideways.
- 70mm wheels for a lighter feel
- Faster yet balanced carving
- Angled edges for a more challenging carve or downhill race
- Thick solid lip for improving sideway drifting
- Not good enough for frequent sliding
- Torn rubber
FREEDARE 70mm Longboard Wheels with ABEC-7 Bearings and Spacers
We’re not done with 70-millimeter wheels just yet. We still have a couple of selections, and that includes FREEDARE 70mm Longboard Wheels. They feature ABEC-7 bearings and spacers carefully attached to them.
The Annular Bearing Engineering Committee (ABEC) standard is a big deal. It represents the strength of ball bearings.
The logic is simple — the higher the ABEC rating, the better it is in terms of efficiency and precision. ABEC-7 is second to the highest, ABEC-9.
Manufactured for professional use, this product is meant for different terrains. It is ideal for urban skating as well as skate parks.
In case of pebbles and other big debris on roads, the polyurethane material can make your rides smoother no matter what. You will be able to ride fast without losing your balance and comfort.
Regarding external design, these wheels look simple and ready for some customization. Their plain appearance is like a blank canvas.
- Great for skate parks
- Efficient and precise ABEC-7 bearings
- Made of polyurethane for stability while rolling over debris
- Plain style for easier customization
- Early signs of wear
70mm Longboard Skateboard Wheels + ABEC 7 Bearings Spacers
With a generous number of free ABEC-7 bearings and spacers, the goal of 70mm Longboard Skateboard Wheels is long-term use. They specifically include eight bearings and four spacers. They are simply outstanding as longboarding wheels for cruising.
Another benefit of the bearings and spacers is the quiet ride you will experience. As long as the two types of components are working together, annoying sounds won’t ruin your moment.
As a plus, the first time you receive the product, you will observe that the bearings are slightly greasy. The purpose of this is to prevent rust in case you expose them to moisture during your initial rides.
These longboard wheels can give a powerful performance on overly rough pavements. They are big and soft, perfect for absorbing the blow of pebbles when they’re rolling too fast. No wonder they’re safe enough for beginners.
Since appearance is also essential for some riders, this product has a wide variety of color options. The colors are all eye-catching, which will surely attract a lot of compliments.
- Eight ABEC-7 bearings and four spacers for regular use and maintenance
- Relaxing rides because of the quiet combination of the bearings and spacers
- Greasy bearings for instant use without consequences
- Shock absorbers
- A lot of vibrant colors available
- Underwhelming quality of color in person
Bigfoot Longboard Wheels 76mm 80A SHR Mountain Cruisers
When it comes to hardness, Bigfoot Longboard Wheels 76mm 80A SHR Mountain Cruisers have Super High Rebound or SHR quality with an 80a durometer rating. They remain stable when going too fast while maintaining grip.
These longboard wheels are also reliable when turning or passing a corner. They have a better grip with their offset core. They are also predictable so you can control the slides perfectly.
Now, let’s focus on speed. Going from one place to another is easier with these wheels. You can effortlessly dodge rocky areas as well as individuals in crowded places because of the consistent grip despite dynamic motions.
Even though you shouldn’t expect to slide like a pro with these wheels, their grip for downhill racing and cruising is just top-notch. You might be surprised how affordable this product is.
- SHR and 80a durometer for stability in speed
- Offset core for a stronger grip while turning
- Predictable to ensure control while sliding
- One of the most affordable ones
- Wobbly due to lack of symmetry
Sector 9 Slide Butterballs Skate Wheels
Here’s another set of longboard wheels with an 80a durometer. Sector 9 Slide Butterballs Skate Wheels can’t slide perfectly, but they have excellent grip because of their softness. They perform better when you choose to go freeriding.
Don’t underestimate the moderate sliding ability of these wheels, though. They can still be used by beginners who are still learning how to slide. That particular limitation of the wheels results in safer training.
Overall, these wheels have a strong grip, but you can let go to slide. It basically has the best of both worlds. It is a decent option because of the balance it provides.
Before we proceed, let’s understand a common problem riders face — uneven wear. If some sections are more worn-out than others, the wheel loses its stability. Good thing that this product uses the special Cosmic Centerset Core.
- Ideal for freeriding because of the powerful grip
- Helpful for novice riders in their first attempt to slide
- Balanced features for gripping and sliding
- Cosmic Centerset Core for even wear
- Chipped graphics
- Not durable enough if you want to slide all the time
Sector 9 Skiddles 70mm 78A
For easier slides, Sector 9 Skiddles 70mm 78A is a must-have. Its rounded edges go toward the core so you can recover easily from cracked surfaces and slide all you want.
Since predictability is important for successful slides, these wheels leave urethane marks. You can check your progress if you’re still training.
We know you’re curious — how soft are these longboard wheels? They are so soft that it will feel like bouncing a ball.
Good news about the colors! They are very similar to the images online. Finally, fewer people will be disappointed seeing a duller version of the product.
As a plus, these wheels are amazing for heavier riders. They tend to slide further if the board is supporting more weight.
- Rounded edges form to the core for nonstop sliding and smooth sailing over cracks
- Urethane lines to stay predictable
- Stays true to the colors presented on product images
- Works flawlessly with heavy riders
- Faded graphics
- Shorter slides if you’re lighter
ABEC 11 SuperFly
Being the biggest yet the softest option here, ABEC 11 SuperFly is unforgettable. It measures 107 millimeters and has a durometer rating of 74a.
Because of their outrageous size and softness, these longboard wheels don’t need a lot of push just to move longer. You can ride freely without exerting too much effort.
The smoothness of these wheels is remarkable, too. Any imperfection on the ground won’t matter anymore. Every crack and debris will seem nonexistent.
Don’t be surprised by the heavy structure of this product. It is only normal for an extremely durable, heavy-duty set of wheels to have a heavier feel.
And, don’t take the “ABEC 11” name seriously. The ABEC scale will always have 9 as the highest rating.
- 107mm wheels with 74a durometer for longer rides with less effort
- Absorbs most of the impact from big and small debris
- Too expensive for some buyers
- Too high for some riders
Orangatang Kilmer 69 mm Freeride
Instead of the Happy Thane formula, Orangatang Kilmer 69 mm Freeride uses Peachy Thane. Designed to have a more slippery feel, Peachy Thane has “buttery” speed control. It can also help you do long slides.
In addition, Peachy Thane makes the wheels very durable with high resistance to flat spotting. The consequences of flat spots are constant bumping motions, slower rides, and accidents.
Meanwhile, because of its cross section’s deep valley form, the 38-millimeter Centerset Core securely supports the lips. It contributes to the smooth slides this product guarantees. It can ensure even wear, too.
As for the applications of these wheels with thick tires, they are great for electric and bamboo longboards. They make the continuous ride smoother, especially when you take rough roads.
- Slippery and durable Peachy Thane formula for long slides
- 38mm Centerset Core for even wear and smooth slides
- Durable thick tires
- Doesn’t have free bearings
Powell Peralta Rat Bones
With its 60-millimeter diameter, Powell Peralta Rat Bones wheels are the smallest ones on this list. However, it is harder than some big options here because of its 85a durometer.
Despite its small size, this product can be used on any terrain. Since 85a isn’t too hard, it remains soft enough for quiet cruising as well as rolling over rocks and other debris. Meanwhile, you will appreciate its hardness when you go down tarmac and see that the wheels are still okay.
As expected from a high durometer rating, these longboard wheels have a good grip. They also roll smoothly on rough concrete.
Another factor why these wheels are charming for a lot of riders is the vintage feel they give. They will let you experience all over again (or for the first time) the rush of skateboarding or rollerskating in the 1980s.
- Balanced 85a durometer for cruising and downhill racing
- Flawless on urban streets
- Vintage experience
- Inconvenient for tricks
- Faded or chipped graphics
- Too small for some riders
How to Choose Good Longboard Wheels
We understand if the number of products on our list intimidates you as a buyer. Each one has a different set of features to attract different types of riders.
Now, what kind of rider are you? Are you a beginner or an expert? Do you like cruising, downhill racing, or both? To find out what’s best for you, check out this guide in selecting the right longboard wheels.
The key here is to check the diameter. Buying big or small wheels isn’t just about fit; it’s also about the experience you want to have with your longboard.
Before we discuss wheel sizes according to fit and speed, let’s find out the standard measurements first. The choices are generally within the 64- to 80-millimeter range with 70mm as the average.
However, some riders prefer wheels smaller than 64 millimeters to experience traditional skateboarding with a longboard.
Every rider must avoid wheelbite. Wheelbite usually happens if large wheels are installed for longboards without cutouts. It can stop movement without any warning, causing accidents. That’s why the wheels should fit the setup you have.
In the first place, however, it’s your responsibility to choose a board with big cutouts around its deck. The cutouts will let you pick any longboard wheel size.
But, if the longboard you want has zero or small cutouts, there’s a solution. The least you can do is install a 1/4-inch riser pad. That will give you the chance to buy wheels bigger than 70 millimeters.
And, if you’re planning to make a city cruiser from a simple park deck, 65-millimeter wheels work well with a 1/4-inch riser.
Regarding kingpin trucks, the reverse type is taller. It provides more room for the wheels than the regular one.
When it comes to maximum speed and acceleration, you just have to understand the general idea of wheel sizing.
Big wheels don’t accelerate instantly. They need more time than smaller wheels. However, their top speed is higher, adding stability over debris and cracks.
On the other hand, small wheels can fit most longboards. They will also give you better control over acceleration. But, they obviously have a limit in terms of speed. On the bright side, that’s helpful for first-timers.
Literally the area of the wheel making direct contact with the surface, the contact patch is either narrow or wide. The common range starts from 38 up to 55 millimeters, but you may choose something as compact as 29 millimeters and as wide as 70.
Read on to learn more about the width as well as the quality of a typical modern contact patch.
A narrow contact patch has less grip. Some people may think that’s a bad idea, but a weaker grip has a purpose as well. It is ideal for freeride longboarding.
Freeride includes downhill riding, but it works with lower speeds. It requires powerful slides so your descent looks impressive.
You may spin and use other tricks to impress people, but make sure to control your speed to achieve what you want to accomplish. Tricks work better with less grip.
On the other hand, a wide contact patch is clearly designed for gripping surfaces. It is still effective for downhill sliding because of the slower speed and excellent control.
However, with a wide contact patch, you can’t shift techniques easily. You will have a hard time balancing slides and grips.
Stone-ground contact patches are in-demand for the freeride style. When fresh out of the mold, they are shiny because of the coating called mold release or skin.
The skin has its downside, though. It has an extremely strong grip you can’t control at first. You won’t be able to slide initially.
You will have no choice but to deal with the grippy surface until the skin is removed. That may take several days or miles of riding with your longboard.
Fortunately, wheels nowadays have bare contact patches. Some manufacturers remove the coating themselves before packaging. With the right product, you can slide nonstop as soon as you install the wheels.
Beginners, however, should stick to a stone-ground contact patch. Sliding is a dangerous technique for first-timers so they need some sort of limitation.
Referring to the outer edge of the contact patch, the lip comes in different shapes.
This type of lip is usually thick or sharp. Its focus is constant grip, especially for downhill rides. It is not ideal for sliding, but it’s recommended for deep carving and tight corners.
Breaking traction is effortless with rounded lips. Like what we mentioned earlier, less grip promotes an easier transition from sliding to gripping, and vice versa. It is effective for freeriding.
This may surprise you, but durometer isn’t the only factor to determine the hardness of the wheels. Go ahead and see for yourself the connection between durometers and urethane formulas.
The standard range based on store selections is 75a to 88a. The harder types start from 83a.
It turns out that longboard wheels are generally softer than skateboard wheels, proven by the 90a-101a range of the latter.
Furthermore, a low or soft durometer rating has more grip but less speed. It usually leaves a lot of urethane lines on the ground, which is useful for control and progressive rides. Unfortunately, it wears out fast.
Meanwhile, a high or hard durometer rating has less grip but more speed. It is more exciting for quick slides. It can also take gliding up a notch with a longer distance for every push.
Just because two different wheels have the same durometer doesn’t mean you can expect the same performance from both of them. This time, it all comes down to the urethane formula.
Urethane formulas are usually categorized into freeride and downhill formulas. Again, freeride is about smooth slides and swift transitions while downhill rides require durability and grip.
Placement, size, and material are the factors that can make or break the quality of the wheel’s core.
There are three kinds of core placements: sideset, centerset, and offset.
Sideset core is perfectly aligned with the wheel’s inner lip. It has the least amount of grip to ensure effortless slides. It is a common choice for novice and freeride users.
However, sideset core is the hardest to control. It can also make the lips wear out unevenly. Because of the faster wear of the inner lip than the outer one, you will spot a serious case of coning.
Meanwhile, centerset core is obviously at the center. It is the total opposite of sideset core since it has the strongest grip. Its grip comes from the enlarged inner lip it makes.
Durability is another benefit of the centerset core. You can flip it regularly to make sure it wears out evenly. Freeride wheels take advantage of this by combining the core to rounded lips and narrow contact patches.
Finally, we have the offset core. It is basically the combination of sideset and centerset cores. It allows smooth slides while maintaining a subtle grip, leading to absolute control.
Cores with bigger diameters are faster. They are effective for commutes, road trips, downhill rides, and freerides.
What makes larger cores better is extra width. Wider cores work effectively with urethane to back up even wear.
The harder the core is, the faster the wheel gets. Harder cores can also maintain the structure of urethane even when you slide all the time. They are sought-after for even wear.
However, using hard wheel cores for downhill racing can be risky. You might lose control and fail to slow down when things start to get too intense.
Once you get your hands on the right longboard wheels for your skill level and personal preferences, try your best to clean them regularly to prolong their lifespan. Some wheels can be very expensive so it would be such a waste to replace them more frequently than necessary.
We suggest following these simple tips for the sake of your precious wheels:
- Wipe off debris from the core with a washcloth.
- Soak the wheels in warm soapy water for 10 to 15 minutes.
- Scrub the wheels while still soapy with a rag and/or old toothbrush.
- Wipe the wheels dry with paper towels or rags.
Fireball Beast 76mm Longboard Skateboard Wheels aren’t just value for money because of their free bearings. We love how the manufacturer promotes instant use without limitations by using SlidePrepped technology. Without coating on the contact patch, you can start sliding right after installation.
However, we still recommend other high-quality products on the list since there are other factors to consider. Size, contact patch, lip, durometer, and core vary from one model to another.
Before your purchase, make sure the wheels you’re going to buy will fit your longboard and match the speed you can handle. Problems like wheelbite, chipped sections, and lack of control will only put your money to waste.